Commands Listed in Alphabetical Order
Syntax
SETUP<x>:DATE
?
Examples
SETUP4:DATE? might return SETUP4 :DATE: 04–18–06 which is the setup
date for channel 4.
SETUP<x>:LABEL
This command specifies the setup label for the specified channel <x>, where
x can be 1 through 10.
Group
Save and Recall
Syntax
SETUP<x>:LABEL <Qstring>
Arguments
<Qstring> is an alphanumeric string of characters, enclosed in quotes, that
defines the label text for SETUP<x>. The length of the string is limited to 30
characters.
Examples
SETUP:LABEL? might return SETUP1: LABEL: TEST 2 which is the label setup
for channel 1.
SETUP<x>:TIME? (Query Only)
Returns the time when the oscilloscope setup was saved for the specified channel
<x>, where x can be 1 through 10.
Group
Save and Recall
Syntax
SETUP<x>:TIME?
Examples
SETUP2:TIME? might return “SETUP2:TIME: 15:24:07 which is the setup
time for channel 2.
SOCKETServer:ENAble
This command enables or disables the socket server which supports a Telnet or
other TCP/IP socket connection to send commands and queries to the instrument.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-763
To Next Page
Loading...
Need help?
General
