Tektronix MDO4000B Series User Manual

Commands Listed in Alphabetical Order
Syntax
TRIGger FORCe
TRIGger?
Arguments
FORCe creates a trigger event. If TRIGger:STATE is set to READy, the acquisition
will complete. Otherwise, this command will be ignored.
Examples
TRIGGER FORCE forces a trigger event to occur.
TRIGger:A
Sets the A trigger level automatically to 50% of the range of the minimum and
maximum values of the trigger input signal. The query returns current A trigger
parameters. The trigger level is the voltage threshold through which the trigger
source signal must pass to generate a trigger event. This command w
orks for the
following cases: Edge Trigger (when source is not AC line or power), Logic
Trigger (when Clock Source is not Off or Logic Pattern is Don't Care), and Pulse
Width Trigger.
Group
Trigger
Syntax
TRIGger:A SETLevel
TRIGger:A?
Related Commands
TRIGger:A:EDGE?,
TRIGger:A:LOGIc?,
Arguments
SETLevel sets the A trigger level to 50% of the range of the minimum and
maximum values of the trigger input signal.
Examples
TRIGGER:A SETLEVEL sets the A trigger level to 50% of the range of the
minimum and maximum values of the trigger input signal.
TRIGGER:A? might return a long response with A trigger parameters,
some of which could be as follows:
:TRIGGER:A:MODE AUTO;TYPE
EDGE;LEVEL 20.0000E-3;LEVEL:CH1 20.0000E-3;CH2 0.0000
;
CH3 0.0 000;CH4 0.0000;:TRIGGER:A:UPPERTHRESH OLD:CH1
1.4000;CH2 800.0000E-3;CH3 8 00.0000E-3;CH4
800.0000E-3;:TRIGGER:A:LOWERTHRESHOLD: CH1 20.0000E-3;CH2
0.0000;CH3 0.0000;CH4 0.0000;:TRIGGER:A:HOLDOFF:TIME
20.0000E-9;:TRIGGER:A:EDGE:SOURCE CH1;COUPLING
DC;SLOPE RISE;:TRIGGER:A:LOGIC:CLASS SETHOLD;FUNC
TION
2-770 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual

Tektronix MDO4000B Series Specifications

General

Brand	Tektronix
Model	MDO4000B Series
Category	Test Equipment
Language	English