Tektronix MDO4000B Series User Manual

Commands Listed in Alphabetical Order
Examples
TRIGger:A:BUS
:B1:ARINC429A:CONDITION STARt
enables triggering on
the first bit of a word.
SEARCH:SEARC
H1:TRIGger:A:BUS:B1:ARINC429A:CONDITION ?
might
return ERROR, indicating a trigger on packet error condition.
TRIGger:A:BUS:B<x>:ARINC429A:DATA:HIVALue
When the trigger condition is set to DATA or LABELANDDATA, and the
qualifier is set to either INrange or OUTrange, this command specifies the
upper value of the range for a trigger on the data field. (Use the command
TRIGger:
A:BUS:B<x>:ARINC429A:DATA:VALue to specify the lower value of
the range). The default is all X's (don't care). B<x> is the bus number.
Conditions
This command requires installation of a DPO4AERO application module for
MDO4000C models, or MDO3AERO for MDO3000 models.
Group
Trigger
Syntax
TRIGger:A:BUS:B<x>:ARINC429A:DATA:HIVA Lue <QString>
TRIGger:A:BUS:B<x>:ARINC429A:DATA:HIVA Lue?
Related Commands
BUS:B<x>:ARINC429A:DATA:FORMAT
TRIGger:A:BUS:B<x>:ARINC429A:CONDition
TRIGger:A:BUS:B<x>:ARINC429A:DATA:QUALifier
TRIGger:A:BUS:B<x>:ARINC429A:DATA:VALue
Arguments
QString is a quoted string of 19, 21, or 23 bits. The allowable characters are0,
1, and X. The bits specified in the quoted string repla
ce the least significant bits,
leaving any unspecified upper bits unchanged.
NOTE. The size of the QString is dependent on the data field format selected using
BUS:B<x>:ARINC429A:DATA:FORMAT. Also, the store d QString is reset to its
default value whenever the data field format is changed.
Examples
TRIGger:
A:BUS:B<x>:ARINC429A:DATA:HIVALue
"XXXXXXXXXXXXXXX1000" sets the upper limit of the range to
XXXXXXXXXXXXXXX1000.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-775

Tektronix MDO4000B Series Specifications

General

Brand	Tektronix
Model	MDO4000B Series
Category	Test Equipment
Language	English