Tektronix MDO4000B Series User Manual

Commands Listed in Alphabetical Order
TRIGger:A:RU
NT? (Query Only)
Returns the current A runt trigger parameters.
Group
Trigger
Syntax
TRIGger:A:RUNT?
Examples
TRIGGER:A:RUNT? might return :TRIGGER:A:RUNT:SOURCE CH1;POLARITY
POSITIVE;WHEN OCCURS;WIDTH 4.0000E-9
.
TRIGger:A:RUNT:POLarity
This command specifies the polarity for the runt trigger.
Group
Trigger
Syntax
TRIGger:A:RUNT:POLarity {EITher|NEGative|POSitive}
TRIGger:A:RUNT:POLarity?
Arguments
POSitive indicates that the rising edge crosses the low threshold and the falling
edge recrosses the low threshold without either edge ever crossing the high
threshold.
NEGative indicates that the falling edge crosses the high threshold and the
rising edge recrosses the high threshold without either edge ever crossingthe
low threshold.
EITher triggers on a runt of either polarity.
Examples
TRIGGER:A:RUNT:POLARITY NEGATIVE specifies that the polarity of the A
pulse runt trigger is negative.
TRIGGER:A:RUNT:POLARITY? might return :TRIGGER:A:RUNT:POLARITY
POSITIVE
indicating that the polarity of the A pulse runt trigger is positive.
TRIGger:A:RUNT:SOUrce
This command specifies the source waveform for the A runt trigger.
Group
Trigger
2-896 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual

Tektronix MDO4000B Series Specifications

General

Brand	Tektronix
Model	MDO4000B Series
Category	Test Equipment
Language	English