Service Guide 23
Specifications
Physical dimensions
Dimensions Specification
Height: 46.3 cm (18.2 in.) With Lower Tray Assembly: 68.6 cm (27 in.)
Width: 50.73 cm (20 in.) With output tray: 78.2 cm (30.8 in.)
Depth: 49.2 cm (19.4 in.)
Weight: Approximately 47.5 kgs (104.6 lbs.) with consumables installed.
Approximately 31.9 kgs (70.2 lbs.) without Lower Tray Assembly.
Printer clearances
Clearances Specification
Top: 7.6 cm (3 in.)
Left: 7.6 cm (3 in.)
Right: 10.2 cm (4 in.) for handling the paper tray
Front: Unlimited for removal of consumables
Rear: 15.3 cm (6 in.) for connecting computer cable and power cord
Bottom: No obstruction under printer that could block its cooling vents.
Mounting surface
flatness:
Within 2 degrees of horizontal with all four feet in contact with the
table surface.
To Next Page
Loading...
General