Tektronix TBS1032B User Manual

Default setup
This appendix describes the options, buttons and controls that change settings
when you push the Default Setup button. The last page of this appendix lists
settings that do not change.
NOTE. When you push the Default Setup button, the oscilloscope displays the
channel 1 waveform and removes all other waveforms.
Menu or system Option, button, or knob Default setting
Acquire (three mode options) Sample
Averages 16
Run/Stop Run
Autorange Autorange Off
Mode Vertical and Horizontal
Cursor Type Off
Source Ch1
Display Type Vectors
Persist Off
Format YT
Backlight 100%
FFT Source Ch1
Window Hanning
FFT Zoom X1
Horizontal Position 0.00 s
Scale (seconds/division) 500 μs
Math Operation -
Sources Ch1 - Ch2
Position 0 divs
Vertical Scale 2 V
Measure (all) Source Ch1
Type None
Trigger Type Edge
Source Ch1
Slope Rising
Mode Auto
Coupling DC
Holdoff 500.0 ns
TBS1000B and TBS1000B-EDU Series Oscilloscopes User Manual 139

Tektronix TBS1032B Specifications

General

Brand	Tektronix
Model	TBS1032B
Category	Test Equipment
Language	English