Tektronix TBS1052B User Manual

Mains overvoltage
category rating
Overvoltage Category II (as defined in IEC 61010-1)
Environmental compliance
This section provides information about the environmental impact of the product.
Product end-of-life
handling
Observe the following guidelines when recycling an instrument or component:
Equipment recycling. Production of this equipment required the extraction and use
of natural resources. The equipment may contain substances that could be
harmful to the environment or human health if improperly handled at the
product’s end of life. To avoid release of such substances into the environment
and to reduce the use of natural resources, we encourage you to recycle this
product in an appropriate system that will ensure that most of the materials are
reused or recycled appropriately.
This symbol indicates that this product complies with the applicable
European Union requirements according to Directives 2012/19/EU
and 2006/66/EC on waste electrical and electronic equipment
(WEEE) and batteries. For information about recycling options,
check the Tektronix Web site (www.tek.com/productrecycling).
Compliance information
TBS1000B and TBS1000B-EDU Series Oscilloscopes User Manual xvii

Tektronix TBS1052B Specifications

General

Bandwidth	50 MHz
Channels	2
Sample Rate	1 GS/s
Vertical Resolution	8 bits
Vertical Sensitivity	2 mV/div to 5 V/div
Timebase Range	5 ns/div to 50 s/div
Interfaces	USB 2.0
Record Length	2.5 kpts
Display	7-inch WVGA (800 x 480)
Trigger Types	Edge, Pulse Width
Display Type	Color LCD
Display Resolution	800 x 480
Input Impedance	1 MΩ
Power Supply	100 to 240 V