■
Selectable 20 MHz bandwidth limit
■
2,500 point record length for each channel
■
Autoset
■
Autoranging
■
Setup and waveform storage
■
USB Flash Drive port for file storage
■
PC communications through the USB Device port with OpenChoice PC
Communications software
■
Connect to a GPIB controller through an optional TEK-USB-488 adapter
■
Cursors with readouts
■
Trigger frequency readout
■
34 automatic measurements — and measurement gating
■
Waveform averaging and peak detection
■
Math functions: +, -, and × operations
■
Fast Fourier Transform (FFT)
■
Pulse Width trigger capability
■
Video trigger capability with line-selectable triggering
■
External trigger
■
Variable persistence display
■
User interface and help topics in 11 languages
■
Zoom feature
Installation
Power cord
Use only the power cord provided with your oscilloscope. Appendix C:
Accessories lists the standard and the optional accessories.
Power source
Use a power source that delivers 90 to 264 VAC
RMS
, 45 to 66 Hz. If you have a
400 Hz power source, it must deliver 90 to 132 VAC
RMS
, 360 to 440 Hz.
The product's maximum power consumption is 30 W.
Getting started
2 TBS1000B and TBS1000B-EDU Series Oscilloscopes User Manual
To Next Page
Loading...
Need help?
General
