General Safety Summary
vi
TDS 500D, TDS 600C, TDS 700D & TDS 714L Performance Verification and Specifications
Electrostatic Discharge. Acquisition circuitry in the TDS 694C/794D is very
susceptible to damage from electrostatic discharge and from overdrive signals.
To prevent electrostatic damage to the TDS 694C/794D, be sure to operate the
oscilloscope only in a static-controlled environment. Be sure to discharge to
ground any electrostatic charge that may be present on cables and probes before
attaching them to the oscilloscope.
To prevent damage from electrostatic discharge, install short-circuit terminations
on unused input connectors. Always use a wrist strap with internal impedance
(provided with your instrument) when handling your oscilloscope or making
connections.
Terms in this Manual. These terms may appear in this manual:
WARNING. Warning statements identify conditions or practices that could result
in injury or loss of life.
CAUTION. Caution statements identify conditions or practices that could result in
damage to this product or other property.
Terms on the Product. These terms may appear on the product:
DANGER indicates an injury hazard immediately accessible as you read the
marking.
WARNING indicates an injury hazard not immediately accessible as you read the
marking.
CAUTION indicates a hazard to property including the product.
Symbols on the Product. The following symbols may appear on the product:
WARNING
High Voltage
Protective Ground
(Earth) Terminal
CAUTION
Refer to Manual
Double
Insulated
CSA Certified Power Cords. CSA Certification includes the products and power
cords appropriate for use in the North America power network. All other power
cords supplied are approved for the country of use.
Product Damage
Precautions
Symbols and Terms
Certifications and
Compliances
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
