TDS 500D, TDS 600C, TDS 700D & TDS 714L Performance Verification and Specifications
vii
Preface
This is the Performance Verification and Specifications for the TDS 500D,
TDS 600C, TDS 700D, and TDS 714L Oscilloscopes. It contains procedures
suitable for determining if each instrument functions, was adjusted properly, and
meets the performance characteristics as warranted. The following models are
covered:
TDS 500: TDS 520D, TDS 540D and TDS 580D
TDS 600: TDS 654C, TDS 680C, TDS 684C and TDS 694C
TDS 700: TDS 714L, TDS 724D, TDS 754D, TDS 784D, and
TDS 794D
This document also contains the technical specifications for these oscilloscopes.
Related Manuals
The following documents are related to the use or service of this oscilloscope:
H The TDS 500D, TDS 600B & TDS 700D User Manual describes how to use
this oscilloscope.
H The TDS Family Programmer Disk, included with the User Manual,
describes using a computer to control the oscilloscope through the GPIB
interface.
H The TDS 500D, TDS 600B & TDS 700D Reference describes a quick
overview of how to operate your oscilloscope.
H The TDS 500D, TDS 600C, TDS 700D & TDS 714L Service Manual
describes information for maintaining and servicing the oscilloscope to the
module level.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
