Tektronix TDS 784D Technical Reference

Warranted Characteristics
TDS 500D, TDS 600C, TDS 700D & TDS 714L Performance Verification and Specifications
2–21
Table 2–10: Warranted characteristics — Signal acquisition system (cont.)
Name Description
Analog Bandwidth, DC-50 W Coupled
and Bandwidth selection is FULL,
Volts/Div
TDS 654C
Bandwidth
2
TDS 680C & 684C
Bandwidth
2
TDS 600C
10 mV/div – 1 V/div
DC – 500 MHz DC – 1 GHz
5 mV/div – 9.95 mV/div DC – 450 MHz DC – 750 MHz
2 mV/div – 4.98 mV/div
DC – 300 MHz DC – 600 MHz
1 mV/div – 1.99 mV/div
DC – 250 MHz DC – 500 MHz
Volts/Div
TDS 694C
Bandwidth
2
10 mV/div – 1 V/div DC – 3 GHz
Analog Bandwidth, DC-50 W Coupled
and Bandwidth selection is FULL,
TDS 500D/700D/714L
Volts/Div
TDS 520D, 540D,
714L, 724D & 754D
Bandwidth
2
TDS 580D &
TDS 784D
Bandwidth
2
10 mV/div – 1 V/div DC – 500 MHz DC – 1 GHz
5 mV/div – 9.95 mV/div DC – 500 MHz DC – 750 MHz
2 mV/div – 4.98 mV/div DC – 500 MHz DC – 600 MHz
1 mV/div – 1.99 mV/div DC – 450 MHz DC – 500 MHz
Volts/Div
TDS 794D
Bandwidth
2
10 mV/div – 1 V/div DC – 2 GHz
Crosstalk (Channel Isolation) ≥100:1 at 100 MHz and ≥30:1 at the rated bandwidth for the channel’s Volt/Div setting,
for any two channels having equal Volts/Div settings.
TDS 694C: ≥100:1 at rated bandwidth for any two channels having equal
Volts/Div settings.
Delay Between Channels, Full
Bandwidth
TDS 600C: ≤100 ps for any two channels with equal Volts/Div and Coupling settings and
both channels’ deskew values set to 0
TDS 500D, TDS 694C, TDS 700D, TDS 714L: ≤50 ps for any two channels with equal
Volts/Div and Coupling settings and both channel deskew values set to 0.0 ms.
Input Impedance, DC–1MW Coupled 1 MW ±0.5% in parallel with 10 pF ±3 pF (DC–50 W Coupled only on TDS 694C/794D)
Input Impedance, DC–50 W Coupled
50 W ±1% with VSWR ≤1.3:1 from DC – 500 MHz, ≤1.5:1 from 500 MHz – 1 GHz
Input Impedance, DC–50 W Coupled
TDS 694C
50 W ±1.25% with VSWR ≤1.5:1 from 100 MHz – 1 GHz, VSWR ≤1.7:1 from 1 GHz –
2 GHz, VSWR ≤ 2.0:1 from 2 GHz – 3 GHz
Input Impedance, DC–50 W Coupled
TDS 794D
50 W ±1.25% with VSWR ≤1.5:1 from 100 MHz – 1 GHz, VSWR ≤1.7:1 from 1 GHz –
2 GHz
Input Voltage, Maximum,
DC–1MW,
AC–1MW, or
GND Coupled
TDS 600C (except TDS694C): ±300 V CAT II, 400 V peak;
derate at 20 dB/decade above 1 MHz
TDS 500D/700D/714L (except TDS 794D): ±300 V CAT II, 400 V peak;
derate at 20 dB/decade above 1 MHz
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Tektronix TDS 784D Specifications

General

Brand	Tektronix
Model	TDS 784D
Category	Test Equipment
Language	English