Appendix A: Options and Accessories
A–2
TDS 500D, TDS 600B, & TDS 700D User Manual
Table A–1: Options (cont.)
Option # DescriptionLabel
1M
130,000 record length
Extend record length from 50,000 samples standard as follows:
TDS 520D and TDS 724D: To 250,000 samples on one channel and 130,000 on two
channels
TDS 540D, TDS 580D, TDS 754D, TDS 784D, and TDS 794D: To 500,000 samples on one
channel, 250,000 on two channels, and 130,000 samples on three or four channels
(Option is only available for the models listed above.)
2M
8 M acquisition length
Extend standard acquisition length as follows:
TDS 520D and TDS 724D: To 2 M samples on two channels and 4 M on one channel
TDS 540D, TDS 580D, TDS 754D, TDS 784D, & TDS 794D: To 2 M samples on three or
four channels, 4 M on two channels, and 8 M samples on one channel
(Option includes a hard disk and is only available for the models listed above.)
1R Rackmount Oscilloscope comes configured for installation in a 19 inch
wide instrument rack. For later field conversions, order kit # 016-1236-00.
2C
Communication Signal
Analyzer
Oscilloscope comes configured for communications signal triggering and mask testing.
(Option applies to TDS 500D & TDS 700D only.)
3C P6701B with system
calibration
Oscilloscope comes with a P6701B and calibrated short-wavelength optical reference
receiver on channel 1. (Option applies to TDS 500D & TDS 700D only, except TDS 794D.)
4C P6703B with system
calibration
Oscilloscope comes with a P6703B and calibrated long-wavelength optical reference
receiver on channel 1. (Option applies to TDS 500D & TDS 700D only, except TDS 794D.)
To Next Page
Loading...
Need help?
General
