Tektronix TDS2002 Programmer's Manual

Preface
vi
TDS200/1000/2000 Series Oscilloscope Programmer Manual
H For information on how to service the oscilloscope, refer to the
TDS1000- and TDS2000-Series Digital Storage Oscilloscopes
Service Manual (071-1076-XX), an optional accessory in English
only
The TDS200-series oscilloscopes offer the following standard and
optional documents:
H For information on the general operation of the oscilloscopes,
refer to the TDS200-Series Digital Real-Time Oscilloscope User
Manual, a standard accessory available in eleven languages
H For information on how to use a TDS2CMA communications
module, or a TDS2MM measurements module with the
oscilloscope, refer to the TDS200 Series Extension Modules
Instructions Manual (071-0409-XX), a standard accessory for
extension modules in English only
H For information on how to service the oscilloscope, refer to the
TDS200-Series Digital Real-Time Oscilloscopes Service Manual
(071-0492-XX), an optional accessory in English only
Conventions
Refer to the Command Syntax section of the Syntax and Commands
chapter (page 2-1) for information about command conventions.
NOTE. References to the TDS2CMA Communications Extension
Module in this manual also apply to the TDS2CM extension module.

Tektronix TDS2002 Specifications

General

Brand	Tektronix
Model	TDS2002
Category	Test Equipment
Language	English