Command Syntax
TDS200/1000/2000 Series Oscilloscope Programmer Manual
2−1 1
Table 2−5: Oscilloscope handling of incorrect numeric arguments
Argument value Oscilloscope response
Numeric argument is
less than lowest correct
value for that command
Sets the specified command to the lowest correct
value and executes the command
Numeric argument is
greater than the highest
correct value for that
command
Sets the specified command to the highest correct
value and executes the command
Numeric value is be−
tween two correct values
Rounds the entered value to the nearest correct
value and executes the command
Quoted String Arguments
Some commands accept or return data in the form of a quoted string,
which is simply a group of ASCII characters enclosed by single
quotes (’) or double quotes ("). For example:
"this is a quoted string"
Symbol Meaning
<QString> Quoted string of ASCII text
Follow these rules when you use quoted strings:
1. A quoted string can include any character defined in the 7-bit
ASCII character set. Refer to Appendix A.
2. Use the same type of quote character to open and close the string:
"this is a valid string"
3. You can mix quotation marks within a string as long as you
follow the previous rule:
"this is an ’acceptable’ string"
To Next Page
Loading...
Need help?
General
