Important safety information
Avoid exposed circuitry. D o not touch exposed connections and
components when power is present.
Do not operate with suspected fa
ilures.
If you suspect that there is damage
to this product, have it inspected by qualified service p ersonnel.
Disable the product if it is da
maged. Do not use the product if it is
damaged or operates incorrectly. If in doubt ab out safety of the product,
turn it off and disconnect the power cord. Clearly mark the product to
prevent its further operati
on.
Before use, inspect voltage probes, test leads, and accessories for
mechanical damage and re
place when damaged. Do not use probes o r
test leads if they are damaged, if there is exposed metal, or if a wear
indicator shows.
Examine the exterior of the product before you use it. Lo ok for cracks
or missing pieces.
Use only specified replacement p arts.
Use proper fuse. Use only the fuse type and rating specified for this
product.
Do not operate in wet/damp conditions. Be aware that condensation may
occurifaunit
is moved fro m a cold to a warm environment.
Do not operate in an explosive atmosphere.
Keep product surfaces clean and dry.
Remove the input signals before
you clean t
he produ ct.
Provide proper ventilation. Refer to the installation instructions in the
manual for details on installing the product so it has proper ventilation.
Slots and open ing s are provided for ventilation and shou ld never be
covered or otherwise obstructed. Do no t push ob jects into any of the
openings.
Provide a safe working environment. Always place the product in a
loca
tion conv enien t for viewing the display an d indicators.
vi TDS3000C Series Oscilloscope User Manual
To Next Page
Loading...
Need help?
General
