Tektronix TDS3012C User Manual

Getting Started
Product and Feature Description
The TDS300 0C series oscilloscopes consist of the following m od els:
Model Channels Bandwidth Maximum
TDS3012C
2100MHz
1.25 GS/s
TDS3014C
4100MHz
1.25 GS/s
TDS3032C
2300MHz
2.5 GS/s
TDS3034C
4300MHz
2.5 GS/s
TDS3052C
2500MHz
5GS/s
TDS3054C
4500MHz
5GS/s
Acquisition Features
WaveAlert Waveform Anomaly Detection. This feature automatically
detects anomalous waveforms by comparing the current waveform to
the previou s waveform. WaveAlert sets how the oscilloscope responds:
stop on anomaly, beep on anomaly, and save anomalous waveform to a
USB flash drive. It's useful for capturing signal glitches and intermittent
waveform errors. (See page 69.)
Separate Digitizers. This feature ensures accurate timing measurements
with separate digitizers for each channel. Each digitizer can sample at
up to the maximum sample rate; the acqui si tion on all channels is alway s
concurrent to provide full single-shot bandwidth on each channel.
Normal Acquisition. This feature acquires 10,000 point waveforms to
capture horizontal detail, and then you can use the zoom
function to
analyze the detail. (See p age 67.)
Fast Tr igger A cquisition. This feature acquires up to 3,400 w avefo rms
per second (500 po int mode) so you can see rapidly changing signals or
intermittent signal irregularit ies. (See pa ge 67.)
Pretrigger. You can capture signals that occu r before the trigger po int.
You can position the trigger point at the b eginning o f the acquisitio n, at
the end, or at any location in between. (See page 8 1.)
TDS3000C Series O scilloscope User Manual 5

Tektronix TDS3012C Specifications

General

Brand	Tektronix
Model	TDS3012C
Category	Test Equipment
Language	English