Tektronix TDS3034B Reference

22
Bottom DescriptionSide
Gating
Bring Selected
Cursor to
Center Screen
Moves the active cursor to
center screen.
Bring Both Cur-
sors On Screen
Moves any off-screen cursor
onto the screen.
High-Low
Setup
Auto Select Automatically uses the best
measurement method depend-
ing on the measurement type.
Histogram Use to measure pulses.
Min-Max Use to measure other wave
shapes.
21
Measure Menu
Bottom Side Description
Select
Measurement
Select an automatic measure-
ment for the selected (active)
channel. You can display up to
four measurements at one time.
See page 44.
Remove
Measurement
Measurement
1-4
Removes a specific measure-
ment.
All
Measurements
Removes all measurements.
Gating
Off Use to take measurements on
the full waveform record.
Screen Use to take measurements on
the portion of the waveform on
screen.
Cursors Use to take measurements on
the portion of the waveform
between the V Bar cursors.

Tektronix TDS3034B Specifications

General

Brand	Tektronix
Model	TDS3034B
Category	Test Equipment
Language	English