Tektronix TDS3034B Reference

46
Measure-
ment
Definition
Positive
Duty Cycle
Positive Duty Cycle +
Positive Width
Period
100%
Measurement of the first cycle in the waveform.
Positive
Overshoot
Measured over the entire waveform.
Positive Overshoot +
Max–High
Amplitude
100%
Positive
Width
Measurement of the first positive pulse in the
waveform. The time between the 50% amplitude
points.
Rise Time Time that the leading edge of the first pulse in the
waveform takes to rise from 10% to 90% of its
amplitude.
RMS The true Root Mean Square voltage over the entire
waveform.
Snapshot
All Mea-
surements
Displays all measurement values (except two-chan-
nel measurements) at the time you pushed the
Snapshot All Measurements button, for the
selected waveform. Push the Snapshot All
Measurements button again to update the list
values. Push the MENU OFF button to clear the list
from the screen.
45
Measure-
ment
Definition
Max The maximum amplitude. The most positive peak
voltage measured over the entire waveform.
Mean The arithmetic mean over the entire waveform.
Min The minimum amplitude. The most negative peak
voltage measured over the entire waveform.
Negative
Duty Cycle
Negative Duty Cycle +
Negative Width
Period
100%
Measurement of the first cycle in the waveform.
Negative
Overshoot
Measured over the entire waveform.
Negative Overshoot +
Low–Min
Amplitude
100%
Negative
Pulse
Width
Measurement of the first negative pulse in the
waveform. The time between the 50% amplitude
points.
Phase The amount one waveform leads or lags another in
time. Expressed in degrees, where 360_ comprise
one waveform cycle.
Pk–Pk Measured over the entire waveform.
Peak-to-peak = Max – Min
Period Time it takes for the first complete signal cycle to
complete in the waveform. Measured in seconds.

Tektronix TDS3034B Specifications

General

Brand	Tektronix
Model	TDS3034B
Category	Test Equipment
Language	English