18
4.2 Serve as a router
If you use the router for the first time or the router is restored to factory settings, follow the quick
installation guide to configure the internet access. If you want to modify internet parameters or
other settings, you can follow the instruction in this chapter.
By default, the router works in the router mode. Under this mode, connect the WAN port of the
router to the internet, connect the LAN ports to user devices and complete the internet settings,
then you can access the internet on these devices.
Parameters are provided by your ISP. Contact your ISP for any doubts.
4.2.1 Set up a PPPoE connection
If the ISP provides you with PPPoE user name and password, you can choose this connection type
to access the internet. The application scenario is shown below.
Configuring procedures:
Step 1 Start a web browser on a device connected to the router and visit tendawifi.com to log in
to the web UI of the router.
Step 2 Choose Internet Settings.
Step 3 Set Operating Mode to Router.
Step 4 Set Connection Type to PPPoE.
Step 5 Enter User Name and Password provided by your ISP.
Step 6 Click OK at the bottom of the page.