Tenda AC6 User Manual

Functions on the router’s user interface
72
LAN IP address
Here you can customize a LAN IP for your local area network.
When you use the wireless repeating feature, you might need to change the LAN IP address in case
there is an IP conflict between the LAN IP of the router and base station.
DHCP server
DHCP server can automatically assign the broadband service information (IP Address, Subnet Mask,
Gateway and DNS Server Address) to the computer or smartphone, or other devices in your
network wirelessly or through Ethernet cables. Do not disable this function until you want to
configure the IP address manually for each device in your network by yourself.
Tips
The DHCP Server will be disabled automatically when you use the Universal Repeater (Client + AP)
feature.
IP address range
When the DHCP server is enabled, the router will assign IP addresses to the attached devices. IP
address range is the range of their IP addresses.
Lease time
Select the lease time of the IP assigned automatically, say 1 Day. When the lease time is used up,
the IP will renew automatically. So you don’t need to reset it manually.
DNS settings
Here you can set up preferred DNS server and alternate DNS Server for the router’s clients’ device.
Typically, if you don’t enable DNS Settings, the DHCP Server of the router will assign the default
preferred DNS server (the LAN IP of the router) to the router’s clients’ device. The feature is
disabled by default.

Tenda AC6 Specifications

General

DSL WAN	No
Ethernet WAN	Yes
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	867 Mbit/s
WLAN data transfer rate (second band)	300 Mbit/s
VPN support	IPsec pass through PPTP pass through L2TP pass through PPTP server PPTP client L2TP client
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Ethernet LAN (RJ-45) ports	4
Antenna gain level (max)	5 dBi
Security algorithms	WPA, WPA-PSK, WPA2, WPA2-PSK, WPS
Product type	Tabletop router
Product color	White
LED indicators	LAN, WAN, WPS
Output current	1 A
Output voltage	12 V
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Cables included	LAN (RJ-45)
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	141.5 mm
Width	220 mm
Height	49 mm