EasyManuals Logo
Home>Tenda>Wireless Router>AC8

Tenda AC8 User Manual

Tenda AC8
125 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #98 background imageLoading...
Page #98 background image
90
10.2 IPv6 LAN setup
To access the page, log in to the web UI of the router and choose IPv6 > IPv6 LAN Settings.
You can change the IPv6 LAN settings here.
Parameter description
Parameter
Description
IPv6 LAN
Address
It specifies two types of IPv6 LAN address assignment.
Auto: The router generates the IPv6 address according to its LAN IPv6 address. By default,
the prefix has 64 digits.
Manual: You need to set the IPv6 LAN address manually.
IPv6 LAN
Prefix
Length
It specifies two types IPv6 LAN prefix address assignment.
Auto: The router obtains an LAN prefix from the upstream device.
Manual: You need to set the IPv6 LAN prefix manually.
DHCPv6
DHCPv6 (Dynamic Host Configuration Protocol for IPv6) is used to assign IP addresses and
prefix to IPv6 hosts on a network. It is the IPv6 equivalent of the DHCP for IPv4. This is also
known as a stateful autoconfiguration.
DHCPv6
Address
Assignment
Method
It specifies the assignment type of DHCPv6 address for the clients connected to the router.
Auto: DHCPv6 stateless configuration. Clients obtain their IPv6 address through Router
Advertisement (Stateless Auto Address Configuration) and other parameters are allocated
by the DHCPv6 server.
Manual: DHCPv6 stateful configuration. The DHCPv6 server automatically assigns IPv6
addresses/prefixes and other network configuration parameters (e.g. DNS server
addresses, etc.) to clients. The user needs to manually configure the start ID and the end ID.

Table of Contents

Other manuals for Tenda AC8

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tenda AC8 and is the answer not in the manual?

Tenda AC8 Specifications

General IconGeneral
DSL WANNo
Ethernet WANYes
Product typeTabletop router
Product colorBlack
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Ethernet LAN (RJ-45) ports4
Antenna gain level (max)6 dBi
Output current1 A
Output voltage9 V
AC input voltage200 - 240 V
Power source typeAC
AC input frequency50 - 60 Hz
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (first band)300 Mbit/s
WLAN data transfer rate (second band)867 Mbit/s
Firewall securityForbid WAN PING from internet
Security algorithmsWPA, WPA-PSK, WPA2, WPA2-PSK
CertificationCE, FCC, CCC, SRRC
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Cables includedLAN (RJ-45)
Package typeBox
Number of products included1 pc(s)
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth127 mm
Width200 mm
Height33.6 mm

Related product manuals