Texas Instruments TI-84 Plus Guide Book

Chapter 14: Applications 409
Starting and Stopping Data Collection
Starting and Stopping Data CollectionStarting and Stopping Data Collection
Starting and Stopping Data Collection
Starting Data Collection
To start sampling, select Start (press q). Sampling will automatically stop when the
number of samples set in the
Time Graph Settings menu is reached. The TI-84 Plus will
then display a graph of the sampled data.
Stopping Data Collection
To stop sampling before it automatically stops, select Stop (press and hold q) at any
time during the sampling process. When sampling stops, a graph of the sampled data is
displayed.
Saving Collected Data
Saving Collected DataSaving Collected Data
Saving Collected Data
Collected data is automatically transferred to the TI-84 Plus and stored in lists
L1 through
L4 when data collection is complete. When you exit the EasyData App, a prompt reminds
you of the lists in which time, distance, velocity, and acceleration are stored.
For more information about the EasyData app, refer to the Texas Instrument Web site at:
education.ti.com/guides.

Texas Instruments TI-84 Plus Specifications

General

Battery type	AAA
Power source	Battery
Number of batteries supported	4
Type	Graphing
Cover	No
Form factor	Pocket
Control type	Buttons
Product color	Black
USB port	Yes
USB 2.0 ports quantity	1
Digits	- digits
Display number of lines	8 lines
Display number of characters	16
RAM capacity	0.024 MB
ROM capacity	0.480 MB
Storage media type	-