Texas Instruments TI-84 Plus Guide Book

Chapter 19: Communication Link 554
When you select an item on the LINK SEND menu, the corresponding SELECT screen is
displayed.
Note: Each SELECT screen, except All+…, is initially displayed with nothing pre-selected.
All+… is displayed with everything pre-selected.
To select items to send:
1. Press y 8 on the sending unit to display the
LINK SEND menu.
2. Select the menu item that describes the data type to send. The corresponding
SELECT screen is displayed.
3. Press } and † to move the selection cursor ( 4 ) to an item you want to select or
deselect.
4. Press Í to select or deselect the item. Selected names are marked with a 0.
D: AppVars...
Displays all software application variables.
E: Group...
Displays all grouped variables.
F: SendId
Sends the Calculator ID number immediately.
(You do not need to select SEND.)
G: SendOS
Sends operating system updates to another
TI-84 Plus Silver Edition or TI-84 Plus. You can
not send the operating system to the TI-83 Plus
product family.
H: Back Up...
Selects all RAM and mode settings (no Flash
applications or archived items) for backup to
another TI-84 Plus, TI-84 Plus Silver Edition,
TI-83 Plus Silver Edition, or to a TI-83 Plus.
SEND RECEIVE

Texas Instruments TI-84 Plus Specifications

General

Battery type	AAA
Power source	Battery
Number of batteries supported	4
Type	Graphing
Cover	No
Form factor	Pocket
Control type	Buttons
Product color	Black
USB port	Yes
USB 2.0 ports quantity	1
Digits	- digits
Display number of lines	8 lines
Display number of characters	16
RAM capacity	0.024 MB
ROM capacity	0.480 MB
Storage media type	-