Texas Instruments TI-Nspire CAS Getting Started

4. Insert the other
keypad.
Ensure that it fits
comfortably into the
guides on the bottom
and sides of the
handheld.
Note: The keypad does
not slide in from the
bottom edge of the
handheld. Instead, fit it
into the guides just above
the batteries.
5. When the keypad is
properly seated on
the handheld, push
the keypad toward
the display screen.
The keypad clicks
into place when
properly seated and
completely inserted
into the handheld.
TI-84 Plus Mode Cables
If you already have TI-84 Plus handhelds and use the I/O port for connectivity,
use the same cables to connect to a TI-Nspire™ handheld using the TI-84
keypad.
Working in TI-84 Mode 127

Texas Instruments TI-Nspire CAS Specifications

General

Type	Graphing
Cover	-
Form factor	Pocket
Control type	Buttons, Touch
Product color	Grey, Silver
Digits	- digits
Display tilting	No
Display resolution	320 x 240 pixels
Display number of lines	- lines
Compatible operating systems	Windows XP/2000\\r Mac OS X 10.4/10.5
Battery type	AAA
Power source	Battery
Number of batteries supported	4
USB port	Yes
USB 2.0 ports quantity	1
RAM capacity	16 MB
ROM capacity	20 MB

Weight and Dimensions

Depth	198.3 mm
Width	100 mm
Height	28.7 mm