84 Configuring Handhelds
Recharging a Battery from a Computer
To recharge a handheld from a computer, a TI-Nspire™ USB driver must be
installed. USB drivers are standard with any TI-Nspire™ software, which
includes:
• TI-Nspire™ Teacher Software
• TI-Nspire™ CAS Teacher Software
• TI-Nspire™ Student Software
• TI-Nspire™ CAS Student Software
• TI-Nspire™ Navigator™ Teacher Software
• TI-Nspire™ CAS Navigator™ Teacher Software
To download software that includes a driver, go to education.ti.com/software.
Understanding the Priority of Power Sources
After installing and charging the rechargeable battery, use the handheld with or
without the AAA (non-rechargeable) batteries. The handheld draws power in
the following order:
• First, from a connected external power source, such as:
- A computer connected through a standard USB cable
- A TI USB wall charger (sold separately in Europe and Asia)
• Second, from the TI-Nspire™ Rechargeable Battery (sold separately)
• Last, from the AAA (non-rechargeable) batteries
Disposing of Used Batteries Safely and Properly
Do not mutilate, puncture or dispose of batteries in fire. The batteries can burst
or explode, releasing hazardous chemicals. Discard used batteries according
to local regulations.
Changing Handheld Settings
Use the options on the Settings menu to change or view the following settings:
• Change language
• Settings (General and Graphs & Geometry)
- Define or restore settings for open documents and the Scratchpad
- Define or restore default settings for the handheld
• Handheld Setup
To Next Page
Loading...
Need help?
General
Weight and Dimensions
