Texas Instruments TI-Nspire CAS Getting Started

Checking Battery Status
To check the status of both the TI-Nspire™ Rechargeable Battery and the AAA
batteries in a handheld:
1. Press c to access the Home screen.
2. Press 5 4 to open the Handheld Status window.
Note: From an open document, press ~ 7 4.
Recharging the Handheld
To recharge the TI-Nspire™ Rechargeable Battery in a handheld, connect it to
either of the following power sources:
• A standard USB cable connected to a computer
• A standard, TI USB wall charger (sold separately in Europe and Asia)
The amount of time required to fully charge the battery may vary, but charging
normally takes about six hours. It is not necessary to remove the TI-Nspire™
Rechargeable Battery from the handheld to recharge it. The handheld operates
normally while it is attached to a charging source.
Configuring Handhelds 83

Texas Instruments TI-Nspire CAS Specifications

General

Type	Graphing
Cover	-
Form factor	Pocket
Control type	Buttons, Touch
Product color	Grey, Silver
Digits	- digits
Display tilting	No
Display resolution	320 x 240 pixels
Display number of lines	- lines
Compatible operating systems	Windows XP/2000\\r Mac OS X 10.4/10.5
Battery type	AAA
Power source	Battery
Number of batteries supported	4
USB port	Yes
USB 2.0 ports quantity	1
RAM capacity	16 MB
ROM capacity	20 MB

Weight and Dimensions

Depth	198.3 mm
Width	100 mm
Height	28.7 mm