Texas Instruments TI-Nspire CAS Getting Started

80 Configuring Handhelds
3. Carefully remove the
batteries.
Caution: You may
need to use a tool to
remove the batteries
as they fit tightly in
the unit. If using a
tool, be careful not to
damage either the
batteries or the
handheld.
4. Insert fresh batteries.
Ensure that the +
side of each battery
faces away from the
display screen.
5. Replace the keypad.
Inserting the TI-Nspire™ Rechargeable Battery
If purchased, complete the following steps to insert the TI-Nspire™
Rechargeable Battery into a handheld.
1. Use a small screwdriver to release the panel from the back of the
handheld.

Texas Instruments TI-Nspire CAS Specifications

General

Type	Graphing
Cover	-
Form factor	Pocket
Control type	Buttons, Touch
Product color	Grey, Silver
Digits	- digits
Display tilting	No
Display resolution	320 x 240 pixels
Display number of lines	- lines
Compatible operating systems	Windows XP/2000\\r Mac OS X 10.4/10.5
Battery type	AAA
Power source	Battery
Number of batteries supported	4
USB port	Yes
USB 2.0 ports quantity	1
RAM capacity	16 MB
ROM capacity	20 MB

Weight and Dimensions

Depth	198.3 mm
Width	100 mm
Height	28.7 mm