Connecting Handhelds and Transferring Files 85
Common Error and Notification Messages
Shown on Message and Description
Sending handheld
“This folder structure is not supported on
the receiving handheld. The receiving
handheld’s OS may need to be updated, which
you can do by selecting Send OS from the My
Documents menu.”
OK
If you get an error when sending a folder to an
older TI-Nspire™ handheld, try updating the OS on
the receiving handheld. If the error persists, you
may have to send the files individually.
Sending handheld
“Transfer failed. Check cable and try
again.“
OK
This message is displayed if a cable is not attached
to the sending handheld’s link port. Remove and
then reinsert the cable and try the document
transmission again.
Click
OK to cancel the transmission message.
Note: The sending handheld may not always
display this message. Instead, it may remain BUSY
until you cancel the transmission.
Sending handheld
“Receiver does not have enough storage space
for file transfer.“
OK
This message indicates that the receiving handheld
does not have enough memory to accept the file
being transmitted.
The user of the receiving handheld must free space
to obtain the new file. To do this:
• Delete unneeded files.
• Store files on a computer for later retrieval,
and then delete them from the TI-Nspire™
handheld.
To Next Page
Loading...
Need help?
General
