Name: Texecom CEL-0007
Brand: Texecom
Rating: 5 (1 reviews)

To Next Page

To Previous Page

4G Module LED indications

When correctly operating, LED’s 2, 3 and 4 should all be illuminated.

LED1

LED2 - APN

LED3 - mobile net

LED4 -

power

Solid

N/A

Registered

Powered

Oﬀ

N/A

Not registered

No power

Flashing

N/A

Registering

N/A

Note: The modem is NOT plug and play, if the modem USB has been unplugged, the SmartCom 4G must be power cycled to enable

the modem.

SmartCom Removal from Mounting Tamper

The removal from mounting tamper should be used for all installations. Ensure a suitable sized screw and ﬁxing is used for the

substrate where the device is mounted. Forced removal of the device from the mounting surface will cause the plastic to be break

and cause a tamper condition.

Note: The plastic housings rear tamper breakout is sacriﬁcial and cannot be reinstated.

Questions and Answers:

Need help?

Do you have a question about the Texecom CEL-0007 and is the answer not in the manual?

Texecom CEL-0007 Specifications

General