OPERATING MANUAL DAF290 TRANSPORTATION AND STORAGE
ThyssenKrupp Aufzugswerke GmbH
4. Transportation and Storage
Packaging:
Shipping takes place depending on the order and drive (transport pallet,
transport frame, machine base frame), optionally covered with foil.
Other packaging types can deviate from this on a country-specific basis
(air / sea / truck freight).
Transportation:
Transport must be effected in compliance with the safety regulations and
observing the centre of gravity of the machine and base frame.
Fork-lift truck transportation:
• In the case of transport with a fork lift, the forks used must be long
enough to prevent the transported goods from tipping over.
• Always pick up the base frame and/or transport pallet, not the machine
itself, with the forks.
• Pay attention to protruding parts! Danger of injury and damage!
Crane transportation:
•
Do not walk underneath suspended loads!
• Transportation chains or ropes are to be secured in the 4 corner drilled
holes of the machine base frame.
• Do not lift by the housing!
• After transportation, remove the wooden transport protection slats.
Pay attention to the picture symbols on the packaging or elsewhere.
This way up Fragile goods Protect against
water
Protect against heat
Hand hooks
prohibited
Attach here
Dimensions and weight
The weight data are specified on the packaging on a label on the machine.
Please refer to the delivery note for the dimensions.
Approximate details, see Technical Data
Product has been
replaced
To Next Page
Loading...
Need help?
General
