OPERATING MANUAL DAF290 SAFETY
ThyssenKrupp Aufzugswerke GmbH
1.2 Safety instructions
Notes regarding the operating manual
A requirement for safe handling and non-disruptive operation of this
subassembly is knowledge of the fundamental safety regulations.
This operating manual contains the most important information that is
required to operate the assembly safely.
The operating manual, in particular the safety instructions, must be complied
with by all persons who work on this assembly.
Furthermore, the rules and regulations covering accident prevention that
apply to the installation site must be complied with.
Obligations of the operator and/or of the installation company
The operator and/or installation company undertakes only to allow persons to
work on the subassembly who
• are familiar with the regulations regarding work safety and accident
prevention and have been instructed in handling the subassembly.
• have read the chapter on safety and the warnings in this operating
manual.
Note: Check the safety awareness of the personnel at regular intervals.
Obligations on the part of personnel
Persons assigned to work on subassemblies undertake before starting work
to
• observe the regulations regarding work safety and accident prevention.
• read the chapter on safety and the warnings in this operating manual.
Training of personnel
Only trained and instructed qualified personnel may work on the assembly.
The responsibility of the personnel must be clearly defined for all tasks
involving commissioning, operation, servicing and repair.
Organisational measures
The required personal safety equipment must be provided by the operator or
installation company, as the case may be. All existing safety devices are to
be tested regularly in accordance with the servicing schedule.
Informal notes on the safety measures
• T
he operating manual is to be kept permanently at the usage site of the
installation.
• In addition to the operating manual the generally applicable and the local
regulations pertaining to accident prevention and environmental
protection must be provided and complied with.
Product has been
replaced