ThyssenKrupp Flow2 User Manual

2007.03.07Flow2 stairliftTab 06: Systematic fault finding
www.ThyssenKruppAccessibility.nl30
Error messages
Error code E61
Type of error Mechanical fault
Error message Level motor overload
Description The level motor has been overloaded for a preset time (standard = 2 seconds).
Priority High
Possible
solution
- Switch the lift off and on.
- Check the connections on the motor module.
- Check the mechanical part of the level mechanism.
- Check whether replacing the motor module solves the problem.
Reset Switch off and on.
Modes 0, 1, 2, 3, 4, 5, 6
Error code E62
Type of error Mechanical fault
Error message Swivel motor overload
Description The swivel motor has been overloaded for a preset time (standard = 2 seconds).
Priority High
Possible
solution
- Switch the lift off and on.
- Check the connections on the MCM.
- Check the mechanical part of the swivel mechanism.
- Check whether replacing the motor module solves the problem.
Reset Switch off and on.
Modes 0, 1, 2, 3, 4, 5, 6
Error code E70
Type of error System error / control error
Error message Swivelling outside limits

ThyssenKrupp Flow2 Specifications

General

Brand	ThyssenKrupp
Model	Flow2
Category	Stairlifts
Language	English