10
1
2
5
ADJUSTMENTS/REPLACEMENTS
1.1 ENGINE OIL AND FILTER CHANGE
under the same.
of the engine (clutch cover).
Collect the aluminum washer (2).
Unscrew the drain cap (3) located on the lower side of the engine and
collect the aluminum washer (4).
Wait for the oil to drain completely through the hole, clean the sealing
Prepare a measure with the amount of the prescribed engine oil necessary
DANGER
IS A BURNS HAZARD.
WARNING
than those prescribed, cause serious damage to the gearbox. Do not
introduce an excessive amount of oil into the gearbox. If this should
happen, drain it as described previously.
ENGINE OIL QUANTITY TABLE
Change oil ........................................................................................ 650 gr.
To Next Page
Loading...
Need help?
General
