Your new outboard motor and lower
unit require break-in for the moving
c o m p o n e n t s a c c o rd i n g t o t h e
conditions described in the following
time table.
21
1
2
3
4
5
6
7
8
9
10
11
12
13
PRE-OPERATING PREPARATIONS
2. Break-in
Note
Proper break-in allows outboard
motor to deliver it full performance for
longer service life.
Do not operate the outboard motor
in closed area or area with no forced
ventilation.
Exhaust gas emitted by this outboard
motor contains carbon monoxide that
will cause death if inhaled continuously.
Inhaling the gas initially causes
symptoms such as feeling of sickness,
drowsiness and headache.
During operation of the outboard motor:
●
Keep peripheral area well ventilated.
●
Always attempt to stay on the
windward side of emission.
Operating the outboard motor without
break-in can shorten service life of the
product.
If any abnormality is experienced
during the break-in;
●
Discontinue the operation
immediately.
●
Have the dealer check the product
and take proper action(s) if
necessary.
To Next Page
Loading...
Need help?
General
