EasyManuals Logo
Home>TOHATSU>Outboard Motor>MFS 9.9C

TOHATSU MFS 9.9C User Manual

TOHATSU MFS 9.9C
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
EP, EPT type
Put the shift lever in the Neutral
position and run the engine for 2-3
minutes at idling speed if it has
been running at full speed.
Turn the main switch key to the
OFF position.
MF, EF, EFT type
Turn the throttle grip to the slow
position.
Put the shift lever in the Neutral
position.
Run the engine for 2-3 minutes at
idling speed if it has been running
at full speed.
Push the stop switch to stop the
engine or release the stop switch
lock.
31
1
2
3
4
5
6
7
8
9
10
11
12
13
Notes
After stopping the engine, close the
air vent screw on the tank cap.
Disconnect the fuel connector of
the engine or the fuel tank.
Disconnect the battery cord of the EF
or EP type engine, if the engine will
not be used for more than 3 days.
4. Stopping
ENGINE OPERATION
(N)
Stop switch lock
OFF
ON
START
!

Do not shift into Reverse during
planning, or control will be lost
leading to serious personal injury,
boat may swamp, and/or hull may
be damaged.
Do not shift into Reverse during
cruising, or control may be
lost, falling down or causing
passenger(s) to be thrown
overboard. Leading to serious
personal injury, and steering system
and/or shifting mechanism may be
damaged.
Stop switch
Stop Switch
Lock

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TOHATSU MFS 9.9C and is the answer not in the manual?

TOHATSU MFS 9.9C Specifications

General IconGeneral
BrandTOHATSU
ModelMFS 9.9C
CategoryOutboard Motor
LanguageEnglish

Related product manuals