TomTom BRIDGE Reference Guide

118
Using the External Camera app
This section explains how to use the External Camera app.
Important: For other settings and operation instructions for the TomTom Bridge, and for instruc-
tions about other apps installed on the TomTom Bridge, please refer to the applicable User
Documentation.
The app shows you the live image from the external camera installed on your vehicle.
Note: A rear-view camera usually switches on when you select reverse gear. Other external
cameras are switched on by a switch on the vehicle dashboard. The app will not work unless it
receives a signal from the camera.
Select the External camera button to start the app. The image from the camera appears
automatically.
On some devices the camera image is shown in a widget on the home screen. Select the widget to
show the camera image full-screen.

TomTom BRIDGE Specifications

General

Megapixel	5 MP
Speaker power	2 W
Processor frequency	1.2 MHz
Operating system installed	Android
Number of built-in speakers	1
Text-to-speech message reader	-
Display diagonal	7 \
Touch technology	Multi-touch
Display resolution	1024 x 600 pixels
Bluetooth version	4.0
RAM capacity	1024 MB
Storage media type	Flash
Internal memory type	RAM
Compatible memory cards	MicroSD (TransFlash)
Internal storage capacity	16 GB
Operating temperature (T-T)	-20 - 60 °C
Map coverage	All Europe
Lifetime map updates	Roads change, but with Lifetime Map Updates your map will always be up to date. Start fresh every few months by downloading a new edition of the industry's most accurate map. New editions are issued four times per year.
Power source type	Cigar lighter
Form factor	Fixed
Product color	Black
Geocaching (GPS stash hunt)	No

Weight and Dimensions

Height	- mm
Weight	- g