TomTom BRIDGE Reference Guide

21
2. Switch view button. Select the switch view button to change between the map view and the
guidance view. When in map view, if you are driving, the small arrow rotates to show you your
current driving direction, with north being up.
3. Zoom buttons. Select the zoom buttons to zoom in and out.
4. Current location. This symbol shows your current location. Select it to add it to My Places or
search near your current location.
Note: If your Bridge cannot find your location using GPS or other methods, the symbol appears
grey.
5. Selected location. Press and hold to select a location on the map. Select the pop-up menu
button to show options for the location, or select the drive button to plan a route to the loca-
tion.
6. Main Menu button. Select the button to open the Main Menu.
7. Map symbols. Symbols are used on the map to show your destination and your saved places:
 Your destination.
 Your home location. You can set your home location in My Places.
 A stop on your route.
 A location saved in My Places.
Select a map symbol to open the pop-up menu, then select the menu button to see a list of
actions you can take.
8. Traffic information. Select the traffic incident to display information about the traffic delay.
Note: Traffic information is only available if your TomTom Bridge has TomTom Traffic.
9. Your route, if you have planned a route. Select the route to clear it, change the route type, add
a stop or save changes to your route.
10. Speed cameras on your route. Select a speed camera to display information about that camera.
11. Route bar. The route bar is shown when you have planned a route.
The guidance view
The guidance view is used to guide you along the route to your destination. The guidance view is
shown when you start driving. You see your current location and details along your route, including
3D buildings in some cities.
The guidance view is normally in 3D. To show a 2D map with the map moving in your direction of
travel, change the 2D and 3D default settings.
Tip: When you have planned a route and the 3D guidance view is shown, select the switch view
button to change to the map view and use the interactive features.

TomTom BRIDGE Specifications

General

Megapixel	5 MP
Speaker power	2 W
Processor frequency	1.2 MHz
Operating system installed	Android
Number of built-in speakers	1
Text-to-speech message reader	-
Display diagonal	7 \
Touch technology	Multi-touch
Display resolution	1024 x 600 pixels
Bluetooth version	4.0
RAM capacity	1024 MB
Storage media type	Flash
Internal memory type	RAM
Compatible memory cards	MicroSD (TransFlash)
Internal storage capacity	16 GB
Operating temperature (T-T)	-20 - 60 °C
Map coverage	All Europe
Lifetime map updates	Roads change, but with Lifetime Map Updates your map will always be up to date. Start fresh every few months by downloading a new edition of the industry's most accurate map. New editions are issued four times per year.
Power source type	Cigar lighter
Form factor	Fixed
Product color	Black
Geocaching (GPS stash hunt)	No

Weight and Dimensions

Height	- mm
Weight	- g