TomTom Runner User Manual

17
Performing a reset
Soft reset
A soft reset is performed each time you disconnect your TomTom GPS watch from a wall charger or
computer.
To perform a soft reset on your watch, follow these steps:
1. Connect your watch to a wall charger or computer.
Wait until your watch shows a battery symbol.
If you are using a computer, wait until MySports Connect finishes updating your watch.
2. Disconnect your watch from the wall charger or computer.
The software on your watch restarts. This performs a soft reset on your watch.
Recovery mode
The recovery mode allows you to reinstall the software on your watch without deleting any personal
data and settings.
To perform a reset on your watch using the recovery mode, follow these steps:
1. Place your watch in the dock BEFORE you connect the dock to the computer.
2. On your watch, press DOWN and keep the button pressed.*
3. Connect the dock to the computer, keep pressing the button until your watch shows
tomtom.com/reset.
4. Release the button and wait for MySports Connect to show Update.
5. Click Update in MySports Connect.
* If the USB port on your computer is not easily accessible, connect the dock to the computer
without the watch. Then press DOWN from the clock screen while you slide the watch into the
dock.
Factory reset
Important: When you perform a factory reset in MySports Connect, all personal data and settings,
including your export settings for MySports Connect, are deleted from your watch. This action
cannot be undone.
You should only use a factory reset as a last resort to restore your watch or if you really want to
remove all your data and settings.
A factory reset reinstalls the software on your watch and this removes the following:
 Your activities.
 Your settings on the watch.
 Your settings for uploading activities in MySports Connect.
Important: When you perform a factory reset, do not disconnect your watch before MySports
Connect has finished restoring your watch. This takes several minutes. Check any messages shown in
MySports Connect and on your watch before you disconnect your watch.
To perform a factory reset on your watch, follow these steps:
1. Connect your watch to your computer and wait until MySports Connect finishes updating your
watch.
2. Expand SETTINGS in MySports Connect.
3. Click FACTORY RESET at the bottom of MySports Connect.
MySports Connect downloads the latest version of the software for your watch.
4. Keep your watch connected when the window for MySports Connect closes.

TomTom Runner Specifications

General

Display size (HxV) (imperial)	0.86 x 0.98 \
Waterproof	Yes
Strap length	228.6 mm
Product color	Gray
Water resistance	5 ATM
Waterproof up to	50 m
Market positioning	Sport watch
Protection features	Water resistant
Recommended activity	Running
Heart rate-based calorie computation	No
Battery life	10 h
Languages support	CZE, DEU, DUT, ENG, ESP, FRE, ITA, POL, POR
Display resolution	144 x 168 pixels

Weight and Dimensions

Weight	62.9 g
Thickness	39.8 mm