EasyManuals Logo
Home>Toro>Lawn Mower>03721

Toro 03721 User Manual

Toro 03721
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background image
Entering Cutting Unit Settings (continued)
Blade count
Mow speed
Height of cut
3
Preparing the Machine
1. Park the machine on a level surface, lower the cutting units, and engage the parking
brake.
2. Shut off the engine, remove the key, and wait for all moving parts to stop.
3. Check the tire air pressure before use.
Note: The tires are overinflated for shipping. Adjust the tire air pressure before
operating the machine.
4. Check the rear-axle lubricant level.
5. Check the hydraulic-fluid level.
6. Grease the machine.
IMPORTANT
Failure to properly grease the machine will result in premature failure of critical parts.
7. Open the hood and check the coolant level.
8. Check the level of the engine-oil level, and close and latch the hood.
Note: The engine ships with oil in the crankcase; however, check the oil level before
and after the engine is first started.
4
Installing the CE Hood Lock
Parts Required
1 Hood-lock bracket
2 Rivet
1 Screw (1/4 x 2 inches)
2 Washer (1/4 inch)
1 Locknut (1/4 inch)
Setup: Preparing the Machine Page 3–12 3466-702 A

Table of Contents

Other manuals for Toro 03721

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toro 03721 and is the answer not in the manual?

Toro 03721 Specifications

General IconGeneral
BrandToro
Model03721
CategoryLawn Mower
LanguageEnglish

Related product manuals