Fuel (continued)
Petroleum Diesel (continued)
Storage Acquire only enough clean, fresh diesel fuel or biodiesel fuel that
you will consume within 180 days. Do not use fuel that has been
stored for more than 180 days.
Oil and additives Do not add to the fuel
Diesel fuel must meet:
Standard Location
ASTM D975
USANo. 1-D S15
No. 2-D S15
EN 590 European Union
ISO 8217 DMX International
JIS K2204 Grade No. 2 Japan
KSM-2610 Korea
Biodiesel
Type This machine can also use a biodiesel-blended fuel of up to B20
(20% biodiesel, 80% petroleum diesel).
The petroleum diesel portion must be ultra low sulfur (<15 ppm).
Use B5 (biodisel content of 5%) or lesser blends in cold weather
Minimum Cetane Rating 40
Biodiesel Precautions Painted surfaces may be damaged by biodiesel blends.
Monitor seals, hoses, gaskets in contact with fuel as they may
degrade over time.
Fuel filter plugging may be expected for a time after converting to
biodiesel blended.
For more information on biodiesel, contact your authorized Toro
distributor.
Storage Acquire only enough clean, fresh diesel fuel or biodiesel fuel that
you will consume within 180 days. Do not use fuel that has been
stored for more than 180 days.
Oil and additives Do not add to the fuel
Biodiesel fuel must meet:
Standard Location
ASTM D6751 USA
EN 14214 European Union
Operation: Before Operation Page 5–2 3466-702 A
To Next Page
Loading...
Need help?
General
