LUBRICATION
BEARINGS (Fig. 4)
The topdresser has 5 self sealing bearings that
must be lubricated with a No. 2 Lithium based
grease.
IMPORTANT: Lubricate the bearings to
maintain a slight leakage on the seals. Too
much grease can cause overheating.
Wheels
Grease fittings weekly or every 40 operating hours.
Use No. 2 Lithium based grease.
ADJUSTMENT LUGS (Fig. 5)
Always maintain a light coat of No. 2 Lithium based
grease on the threads of the four adjustment lugs.
DRIVE CHAIN
Always maintain a light coat of grease on the drive
chain.
10
Figure 4
To Next Page
Loading...
Need help?
General
