Setup
Step
1
Activating the Battery
Parts needed for this step:
80
ounces
Bulk electrolyte with 1.265 specic gravity
(Purchase from a battery supply outlet.)
Procedure
Warning
CALIFORNIA
Pr oposition 65 W ar ning
Batter y posts, ter minals, and r elated
accessories contain lead and lead
compounds, chemicals kno wn to the State of
Calif or nia to cause cancer and r epr oducti v e
har m. W ash hands after handling .
Batter y electr ol yte contains sulfuric acid
which is a deadl y poison and causes sev er e
bur ns.
Do not drink electr ol yte and a v oid contact
with skin, ey es or clothing . W ear safety
g lasses to shield y our ey es and r ub ber g lo v es
to pr otect y our hands.
Fill the batter y wher e clean w ater is al w ays
a v aila ble f or flushing the skin.
F ollo w all instr uctions and compl y with all
safety messa ges on the electr ol yte container .
1. R emo v e the batter y access co v er ( Figure 2 ).
2. R emo v e the batter y from the mac hine
( Figure 2 ).
Important: Nev er fill the batter y with
electr ol yte while the batter y is installed on
the machine. Electr ol yte can be spilled on
other par ts and cause cor r osion.
Figure 2
1. Battery access panel 4. Washer
2. Battery clamp
5. Battery
3. Bolt
3. Clean the top of the batter y and remo v e the
v ent caps ( Figure 5 ).
Figure 3
4. Slo wly pour electrolyte into eac h batter y cell
until the lev el is up to the upper line on the
batter y case .
Important: Do not o v erfill the batter y
because electr ol yte (sulfuric acid) can
cause sev er e cor r osion and dama ge to the
chassis.
12
To Next Page
Loading...
Need help?
General
