Safety and Instructional Decals
Safety decals and instr uctions are easily visible to the operator and are located near any
area of potential dang er . R e place any decal that is damag ed or lost.
112-2540
1. Operator’s Manual location
5. Hour meter
9. Engine temperature
13. Fast
2. Engine—stop
6. Fuel gauge—diesel 10. Glow plug 14. Warning—read the
Operator’s Manual.
3. Engine—run
7. Engine oil 11. Slow 15. Tipping hazard—move the
traction unit with the heavy
end up hill; do not travel
with the loader arms raised.
4. Engine—start
8. Battery
12. Continuous variable setting
104-9957
1. Warning—read the Operator’s Manual.
2. Warning—remove the ignition key and lower the loader arms before leaving the machine.
3. Crushing hazard—install the cylinder lock and read the instructions before servicing or performing maintenance.
4. Cutting hazard of hands or feet—wait for moving parts to stop; stay away from moving parts.
5. Crushing/dismemberment hazard of bystanders—keep bystanders a safe distance from the machine.
6. Explosion and electric shock hazard—do not dig in areas with buried gas or electrical lines.
104-9951
1. Hot surface/burn hazard—wear protective gloves when
handling the hydraulic couplers and read the Operator’s
Manual for information on handling hydraulic components.
104-9950
1. Warning—read the Operator’s Manual ; maximum load rating
of 500 lb. (228 Kg).
104-9954
1. Crushing hazard of hands or feet—install the cylinder lock.
9
To Next Page
Loading...
Need help?
General
