Toro Dingo TX 525 User Manual

Specications
Note: Specifications and design are subject to c hang e without notice .
Model 22333
Width
34 inches (86 cm)
Length
71 inches (180 cm)
Height
43 inches (109 cm)
Weight
1950 lb (885 Kg)
Operating capacity
553 lb (251 Kg)
Tipping capacity
1580 lb (717 Kg)
Wheelbase
31.2 inches (79 cm)
Dump height (with narrow bucket) 47 inches (119 cm)
Reach—fully raised (with narrow bucket) 22 inches (55 cm)
Height to hinge pin (narrow bucket in highest position) 66 inches (168 cm)
Model 22334
Width
41 inches (104 cm)
Length
71 inches (180 cm)
Height
43 inches (109 cm)
Weight
2050 lb (885 Kg)
Operating capacity
553 lb (251 Kg)
Tipping capacity
1580 lb (717 Kg)
Wheelbase
31.2 inches (79 cm)
Dump height (with narrow bucket) 47 inches (119 cm)
Reach—fully raised (with narrow bucket) 22 inches (55 cm)
Height to hinge pin (narrow bucket in highest position) 66 inches (168 cm)
Attachments/Accessories
A selection of T oro appro v ed attac hments and accessories are a v ailable for use with the mac hine to
enhance and expand its capabilities . Contact y our A uthorized Ser vice Dealer or Distributor or g o to
www .T oro .com for a list of all appro v ed attac hments and accessories .
Important: Use onl y T or o appr o v ed attachments. Other attachments may cr eate an unsafe
operating en vir onment or dama ge the traction unit.
19

Toro Dingo TX 525 Specifications

General

Brand	Toro
Model	Dingo TX 525
Category	Compact Loader
Language	English