Toro GREENSMASTER 3100 Service Manual

Special Tools
NOTE: Order special tools from the TORO SPECIAL
TOOLS AND APPLICATIONS GUIDE (COMMERCIAL
PRODUCTS). Some tools may be available from a local
supplier.
Continuity Tester (Fig. 5)
Battery powered test lamp which is helpful in testing for
continuity of circuits and electrical components when
the current is off.
Figure 5
Volt - Ohm - Amp Meter (Fig. 6)
The meter can test electrical components and circuits
for current, resistance, or voltage draw.
Figure 6
Special Tools Page 5 - 4 Greensmaster
®
3100

Toro GREENSMASTER 3100 Specifications

General

Cutting Units	3
Blade Type	Reel
Drive System	Hydrostatic
Horsepower	21.5 hp (16 kW)
Engine Power	21.5 hp (16 kW)
Number of Blades	11