To Next Page

To Previous Page

___________________________________________________________________________________________

________________________________________________________________________________________________________________________________________________________

No Cutting Units Operate

Cause Correction

Front axle shift lever in “HI” (forward) position. Front axle shift lever must be in “LOW” (rear) position

or cutting units to engage.

Hydraulic oil level too low. Fill to proper level.

Reel speed control linkage damaged or out of adjust- Repair control linkage.

ment

Electrical problem. Check for faulty front axle HI/LOW switch, cutting unit

enga

ge switch, cutting unit relay, reel speed neutral

switch, or wiring and repair if necessary.

Charge pressure low in with machine moving and Inspect charge relief valve and adjust or repair if nec-

utting units engaged - TEST NO. 8. essary.

NOTE: Traction circuit will also be affected.

nspect auxiliary pump and repair or replace if neces-

sary NOTE: Steering and lift will also be affected if

auxiliary pump is damaged.

Mowing circuit pressure too low - TEST NO. 3. Inspect mowing circuit pump check/relief valves and

pair or replace if necessary.

Check for damaged pump and repair or replace if

necessary.

Reelmaster

335-D Page 4 - 17 Troubleshooting

Brand	Toro
Model	Reelmaster 335-D
Category	Lawn Mower
Language	English

Toro Reelmaster 335-D User Manual

Table of Contents

Questions and Answers:

Toro Reelmaster 335-D Specifications

Related product manuals