Introduction
Congratulations on your purchase of the Toro Vision II controller. You have
chosen one of the most sophisticated and technologically advanced irrigation
system controllers available for residential and light commercial applications.
Your new controller has some very unique features and operating
characteristics. So please, take just a few minutes to read through this
manual and familiarize yourself with the Vision II's various components,
programming steps, and control features. We are confident that you will find
the controller easy to program and easy to operate once you have taken this
initial step.
The information in this manual applies to all Vision II 6, 9 and 12 station
models and is divided into four main sections. The first section provides a brief
description of the controller's components and program memory. The second
section takes you step-by-step through the programming procedure for
automatic operation. The third section explains the various ways to operate
the controller manually, as well as detailed information on specific control
features. The fourth and final section provides technical information covering
controller specifications, troubleshooting and fuse replacement. A Watering
Program Record form, located in the back of the manual, provides a
convienent place to record the location of each watering station area and
specific details of your automatic watering program.
To Next Page
Loading...
Need help?
General
