9-5
TROUBLESHOOTING
Overheating power down
If the computer’s internal temperature becomes too high, the computer will automati-
cally enter Hibernation or Standby mode and shut down.
Problem Procedure
Computer shuts down Leave the computer off until the DC IN indicator
and DC IN indicator stops blinking.
blinks orange
NOTE: It is recommended to leave the computer
off until the its interior reaches room temperature
even though the
DC IN
indicator stops blinking.
If the computer has reached room temperature
and still does not start, or if it starts but shuts
down quickly contact your dealer.
Computer shuts down Indicates a problem with the heat dispersal
and its DC IN indicator system. Please contact your dealer.
is flashing green
AC power
If you have trouble turning on the computer with the AC adaptor connected, check
the DC IN indicator. Refer to Chapter 6, Power and Power-Up Modes, for more
information.
Problem Procedure
AC adaptor doesn’t Check the connections. Make sure the cord is
power the computer firmly connected to the computer and a power
(DC IN indicator does outlet.
not glow green)
Hardware and system checklist
To Next Page
Loading...
Need help?
General