3-12
User's Manual
GETTING STARTED
◆ If you carry the computer on board an aircraft or into a hospital, be sure to shut
down the computer in hibernation mode or in shutdown mode to avoid radio
signal interference.
Benefits of standby
The standby feature provides the following benefits:
◆ Restores the previous working environment more rapidly than does hiberna-
tion.
◆ Saves power by shutting down the system when the computer receives no
input or hardware access for the duration set by the System Standby feature.
◆ You can use the panel power off feature.
Executing standby
You can enter standby mode in one of three ways:
1. In Windows XP, click Start, click Turn Off Computer and click Stand by.
In Windows 2000, click Start, click Shut Down, select Stand by and click
OK.
2.Close the display panel. This feature must be enabled. Refer to the System
Power Mode item in Power Saver Utility described in the Control Panel.
In Windows XP, click Performance and Maintenance and click the
TOSHIBA Power Saver icon.
In Windows 2000, double-click the TOSHIBA Power Saver icon.
3. Press the power button. This feature must be enabled. Refer to the System
Power Mode item in Power Saver Utility described in the Control Panel.
In Windows XP, click Performance and Maintenance and click the
TOSHIBA Power Saver icon.
In Windows 2000, double-click the TOSHIBA Power Saver icon.
When you turn the power back on, you can continue where you left when you shut
down the computer.
NOTES: 1. When the computer is shut down in standby mode, the
power indicator glows orange.
2. If you are operating the computer on battery power, you
can lengthen the operating time by shutting down in
hibernation mode. Standby mode consumes more power.
To Next Page
Loading...
Need help?
General