6-15
POWER AND
P
OWER-UP MODES
Replacing the Battery Pack
6. Fit your finger into the indentation next to the Battery Pack and lift it out.
CAUTION: For environmental reasons, do not throw away a spent
Battery Pack. Please return spent Battery Packs to your TOSHIBA
dealer.
Figure 6-1 Removing the Battery Pack
Installing the main Battery Pack
To install a Battery Pack, follow the steps below.
CAUTION: The Battery Pack is a lithium-ion polymer battery, which can
explode if not properly replaced, used, handled or disposed of. Dispose of
the battery as required by local ordinances or regulations. Use only
batteries recommended by TOSHIBA as replacements.
1. Be sure the computer’s power is off and all cables are disconnected.
BATTERY
LOCK
BATTERY PACK
INDENTATION
To Next Page
Loading...
Need help?
General